Wire rope hoist is capable of adapting to many typical uses in industrial lifting operations without subjecting the user to special requirements.The standard range includes 6 construction sizes for capacities from 800kg to 20,000 kg with 2 or 4 rope falls,lifting speed between 1.5 and 12 m/min.
A wide range of travelling trolleys are also available in either double or monorail version with standard and low headroom when using the electric wire rope hoists.
Electric wire rope hoists are available in the following four standard versions:
Version 1 with 2 rope falls for capacities from 800kg to 10,000kg
Version 2 with 4 rope falls for capacities 1,000 kg from 20,000kg
Gearbox (1)
The 2 or 3-stage planetary gear reduces the speed of the electric motor to the rpm necessary for the drum.All gears of the planetary
gear are made of heat-treated high quality steel.
Electric Brake Motor (2)
Three-phase asynchronous 1 or 2 speed motor with cone rotor and integrated cone brake driven by a coil spring.The brake release is due to the sliding
of the rotor after switching-on of the power supply.
Rope Guide (3)
The rope guide basically consists of two parts: a guide ring and a pressure.Spring that properly guide the rope on
the drum grooves.The guide ring maintains the rope in position during the uncoiling, preventing it comingoff the groove
Load Limiter(4)
All "M" series hoists with 2 and 4 rope falls are equipped with a load limiter with 2 reaction thresholds. The load limiter
consists of an electricmechanical system with preset springs acting on two microswitches located in the auxiliary circuit.
Low Headroom Trolleys(5)
Low headroom trolleys are equipped with 2 travel units, consisting of planetary gears with double speed brake motors
directly flanged to the wheels, therefore without external teeth.
A wide range of travelling trolleys are also available in either double or monorail version with standard and low headroom when using the electric wire rope hoists.
Electric wire rope hoists are available in the following four standard versions:
Version 1 with 2 rope falls for capacities from 800kg to 10,000kg
Version 2 with 4 rope falls for capacities 1,000 kg from 20,000kg
Gearbox (1)
The 2 or 3-stage planetary gear reduces the speed of the electric motor to the rpm necessary for the drum.All gears of the planetary
gear are made of heat-treated high quality steel.
Electric Brake Motor (2)
Three-phase asynchronous 1 or 2 speed motor with cone rotor and integrated cone brake driven by a coil spring.The brake release is due to the sliding
of the rotor after switching-on of the power supply.
Rope Guide (3)
The rope guide basically consists of two parts: a guide ring and a pressure.Spring that properly guide the rope on
the drum grooves.The guide ring maintains the rope in position during the uncoiling, preventing it comingoff the groove
Load Limiter(4)
All "M" series hoists with 2 and 4 rope falls are equipped with a load limiter with 2 reaction thresholds. The load limiter
consists of an electricmechanical system with preset springs acting on two microswitches located in the auxiliary circuit.
Low Headroom Trolleys(5)
Low headroom trolleys are equipped with 2 travel units, consisting of planetary gears with double speed brake motors
directly flanged to the wheels, therefore without external teeth.
Electric chain hoists are among the most dependable on the market.The Electric Chain Hoist series was
designed for heavy duty industrial applications, which greatly reduce down time and operational costs.
Chain hoists tolerate large loads with ease and require little maintenance.They provide more allowance for
side pulling,and provide true vertical lift at no extra cost.
● Capacity range: ¼ to 20 Ton.
● Sealed body suitable for both indoor and outdoor applications.
● Forged carbon steel hooks.
● Heavy duty chain bag.
● Easy maintenance control panel.
● Heavy duty motor rated H4.
● Aluminum body.
● Unique, heavy-duty chain guide.
● Re-connectible voltage 230/460 volts / 3-phase / 60 Hz for single speed.
● Pull rotor motor brake.
● Power upper and lower limit switch as an added safety measure. Power limit cuts motor power, not control
voltage. ● Sealed body suitable for both indoor and outdoor applications.
● Forged carbon steel hooks.
● Heavy duty chain bag.
● Easy maintenance control panel.
● Heavy duty motor rated H4.
● Aluminum body.
● Unique, heavy-duty chain guide.
● Re-connectible voltage 230/460 volts / 3-phase / 60 Hz for single speed.
● Pull rotor motor brake.
● Power upper and lower limit switch as an added safety measure. Power limit cuts motor power, not control
● Heat treated helical and spur gears.
● Lifetime lubricated bearings and gear reducer.
● Mechanical load brake inside gearbox with motor brake as dual brake system for added safety.
● Lifting eye required in many specifications for equipment over 40 pounds.
● Overload limiter to prevent dangerous overloading.
● Fuses on input as required by national electric code NEC.
● All ECH series hoists come with a heavy-duty chain container.
● Grade 80 super alloy load chain is precisely calibrated and heat treated for long life